IBhetri yeLithium Ion yePrismatic-NCA103443-3.6V-2010mAh
Ibhetri ye-NCA103443 3.6V 2010mAh yelithium-ion eprismatic yenzelwe izixhobo ze-elektroniki eziphathwayo, izixhobo zemizi-mveliso kunye nezixhobo ezikrelekrele ezifuna izisombululo zamandla ezizinzileyo nezincinci.Le bhetri yibhetri ye-lithium-ion etshajwayo enovoltiji eqhelekileyo eyi-3.6V kunye nomthamo oqhelekileyo we-2010mAh. Yibhetri enobungakanani obuphakathi ukuya kobuncinci kwaye isoloko isetyenziswa kwizixhobo ze-elektroniki eziphathwayo ezifana nezixhobo ezikrelekrele ezinxitywayo, ii-headphone ezingenazingcingo, izixhobo ezincinci okanye izixhobo eziphathwa ngesandla.
Ixhasa ukutshaja kwiqondo lobushushu eliphakathi kwe-10 ne-45℃ kunye nokukhupha i-bhetri kwiqondo lobushushu eliphakathi kwe -20 ne-60℃, kwaye iyakwazi ukuziqhelanisa kakuhle namaqondo obushushu okusebenza. Ibhetri inomda ophantsi wangaphakathi (≤100mΩ) kunye nokusebenza okuphezulu kokutshaja nokukhupha amandla, nto leyo enokuqinisekisa unikezelo lwamandla oluzinzileyo kwisixhobo.
| Hayi. | Izinto | Iinkcukacha zobuchwepheshe | Uluvo |
|---|---|---|---|
| 1 | Umthamo oqhelekileyo | 2010mAh | Ukukhupha umoya okusemgangathweni kwe-0.2C |
| Umthamo omncinci | 1950mAh | ||
| 2 | I-voltage esemthethweni | 3.6V | Umphakamo womsebenzi |
| 3 | I-voltage yokuhambisa | 3.6~3.9V | Kwiintsuku ezili-10 ukusuka eFektri |
| 4 | Umlinganiselo ophezulu wovoltiji wokutshaja | 4.2V | Ngokwendlela yentlawulo esemgangathweni |
| 5 | Ivotshi yokunqamla yokukhululwa | 2.75V | |
| 6 | Impedansi yangaphakathi | ≤100mΩ | Inkcaso yangaphakathi elinganiswe kwi-AC 1KHZ emva kokutshajwa nge-50% |
| 7 | Umphakelo wangoku | 682 miliyamperi | 0~+10℃ Umbane wesiqhelo wokutshaja |
| 1365mA | +10~+45℃ Umbane wokutshaja ophezulu oqhubekayo | ||
| 8 | Umphungulelo wangoku | 0.2C | -20~+60℃ Umbane wokukhupha oqhelekileyo |
| 3820 miliyamperi | 0~+40℃ Umbane wokukhupha ophezulu oqhubekayo | ||
| 9 | Uluhlu lobushushu bokusebenza kunye nokufuma okulinganayo | Iindleko: 10~+45℃, RH ≤85% | Ukukhupha: -20~+60℃ |
| 10 | Iqondo lobushushu lokugcina ixesha elide | <inyanga e-1: -10~+45℃, 60±25%RH<iinyanga ezi-3: -10~+35℃<iinyanga ezi-6: 0~25℃ | |
| 11 | Ubunzima | ≤33.7g |
Izixhobo zovavanyo
(1) Isixhobo Sokulinganisa Ubungakanani
Ukupimwa kobukhulu kufuneka kwenziwe ngezixhobo ezichaneke ubuncinane i-0.01 mm.
(2) I-voltmeter
Iklasi enomgangatho wesizwe okanye iklasi evakalayo ngakumbi enezithintelo zangaphakathi ezingaphantsi kwe-10 KΩ/V.
(3) I-ammeter
Class with national standard or more sensitive class. Total external resistance including ammeter and wire is less than 0.01 Ω.
(4) Impedance Meter
Impedance shall be measured by an AC impedance method (AC 1 kHz LCR meter).
Standard Test Condition
Tests should be conducted with new batteries within one month after shipment from our factory, and the cells shall not be cycled more than five times before the test. Unless otherwise defined, tests and measurements shall be done under a temperature of 25±3℃ and relative humidity of 60±25%.Standard Charge
0.2C = 402 mA
Full charge condition: At 25±3℃, charge with constant current 0.2C kwaye constant voltage 4.2V until the charge current drops below 0.02C.
Charging time is approximately 6.5 hours.
Applications of 3.6V 2010mAh Prismatic Lithium Ion Battery
• Smart wearable devices
• Wireless communication equipment
• Portable electronic devices
• Industrial handheld instruments
• Medical monitoring devices
Iimpawu eziphambili
• High energy density lithium ion chemistry
• Stable 3.6V output voltage
• Compact prismatic battery design
• Long cycle life and low internal resistance
• Suitable for OEM battery pack integration
